IRIS · Heating with the speed of light

The future of
heating.
From within.

IRIS is available: a compact, modular heating system using infrared technology. Fully electric and also suitable for hybrid use alongside an existing heat source.

ElectricInfrared heat source
ModularBuilt around modules
CompactDesigned for indoor use
ControllableIndividual module control
The technology

Clear architecture.
Focused heat.

IRIS in 3D

See how IRIS provides heat and works with hot water, solar panels and a battery.

3:25 min · Dutch · No audio
Schematic concept visualisation of IRIS componentsInside IRIS · from the product brochure
1

Water enters the system

The circulation pump moves water through the heating circuit.

2

Infrared becomes heat

Infrared modules transfer heat to the water. The controller operates the modules in response to heat demand.

3

Heat reaches the building

Heated water flows to the distribution system. Radiator or underfloor heating compatibility is assessed for each project.

Why IRIS?

The differences.
At a glance.

Compact, modular and without an outdoor unit. Compare the key characteristics.

IRIS alongside other heating systems

Swipe sideways to compare all systems.

Comparison of IRIS, a gas boiler, air-to-water heat pump and electric boiler
FeatureIRISInfraredGas boilerGas-firedHeat pumpAir-to-waterElectric boilerResistance
Heat sourceInfraredGasAmbient heatElectric resistance
SoundNo compressor*Burner + pumpCompressor + fanNo compressor*
InstallationWater + electricityGas + flueIndoor + outdoorWater + electricity
MaintenancePump + modulesBurner + systemSystem maintenanceElements + pump
At-appliance emissionsNo combustion*Gas combustionNo combustion*No combustion*
Hybrid usePossiblePossiblePossibleSubject to assessment
ControlPer moduleBurner controlCompressor controlElement control
FootprintCompact · indoorsIndoor unit + flueIndoor + outdoor unitsCompact · indoors

* Pump and installation can be audible. Total CO₂ emissions also depend on the electricity mix.

About this comparison

Efficiency is not the same as consumption

A heat pump transfers ambient heat; IRIS and an electric boiler convert electricity directly into heat. High appliance efficiency therefore does not automatically mean lower electricity use than a heat pump. Compare using the same heat demand, flow temperature and energy tariffs.

Consider the complete installation

Total CO₂ emissions from electric systems also depend on the electricity mix. Sound, warm-up time and maintenance also depend on the pump, heat distribution system and building. Hot water storage is a separate choice. Final IRIS performance is determined by current product and test data.

Product information

The specifications.
Clearly set out.

A sound decision starts with the right information. Final performance and installation requirements depend on the configuration and validation.

PrincipleElectric heating based on infrared
System architectureModular, with individual heating module control
InstallationIndoors; designed without an outdoor unit
Output and connection10 kW nominal according to the brochure; electrical connection assessed per project
Dimensions (H × W × D)Approx. 600 × 700 × 150 mm according to the brochure
Efficiency, sound and lifespanTo be published after verification of product and test data
Domestic hot waterHot water solutions available; capacity matched to your needs
AvailabilityAvailable; contact us about a suitable configuration and delivery
Where IRIS fits

From existing buildings
to new possibilities.

Offices & hospitality

Assess heating demand, usage patterns and opportunities for central control.

Discuss this application

Suitability always requires a heat loss calculation and verification of the electrical connection.

One technology. More possibilities.

From a heat source
to a connected energy system.

Start with the building’s heating demand. Then add the functions that fit everyday use.

Space heating

IRIS provides heat for a suitable water-based distribution system.

Hot water

Our hot water solutions are available. We match the configuration and capacity to your hot water needs.

Generation & storage

Home batteries are available from EIC; solar panels through a partner. We match the battery and inverter to your consumption and electrical connection.

Smart control

EMS, load balancing and smart home integration are intended to coordinate heat demand, available energy and comfort.

IRIS, hot water solutions and home batteries are available; solar panels through a partner. Technical configurations and smart integrations are assessed for each project.

Good to know

Your questions.
Our answers.

Can’t find your question? Get in touch.

Is IRIS a heat pump?

IRIS is an electric heating system based on infrared technology. It uses a different principle from a heat pump. Always compare total energy use and costs for your building.

Can IRIS replace my existing boiler?

This requires an assessment of your heating demand, distribution system, hot water needs and electrical connection. Use the project form to discuss these details with EIC.

Can IRIS also be used in a hybrid setup?

Yes, IRIS can be used in a hybrid setup alongside an existing heat source, such as a boiler or heat pump. We match the connection and controls to the existing system.

Does IRIS provide domestic hot water?

Yes, our hot water solutions are available. We match the configuration and capacity to your hot water needs and simultaneous demand.

Which performance figures are confirmed?

The Kiwa measurement is a proof of concept: an efficiency measurement of the IRIS concept model tested at that time. It is not general product certification; electrical safety, EMC and water-heater safety were not tested in that report. Additional product and safety tests still need to be carried out.

When will IRIS be available?

IRIS is already available. Hot water solutions and home batteries are also available from EIC; we supply solar panels through a partner. Contact us about your preferred configuration and its delivery time.

Who installs IRIS?

Installation is handled by an installer. Discuss your installation enquiry, quotation, schedule and installation directly with the installer. EIC does not install IRIS systems and can answer product and technical questions.

Who do I contact for warranty and service?

Your installer is your point of contact for maintenance, service and warranty enquiries. Discuss the warranty and service terms with your installer when purchasing.

The future of energy
starts with a conversation.

A project, partnership or idea? Let’s explore it together.

Get in touch